High conformability and stability

Through stent design & CoCr material with outstanding flexibility and radial force


Optimized lesion care

Through wide range of 
diameters ( 12 - 24 mm ) 
and lengths ( 19 - 59 mm )


Predictable stent behavior

Through predictable foreshortening


Indication *:
The BeGraft Aortic Stent Graft System is indicated for: 

  • the implantation in the native and / or recurrent coarctation of the aorta (CoA) on adolescent or adult patients

  • restoring and improving the patency of the iliac arteries

* for full information, please see instruction for use

The BeGraft Aortic Stent Graft System is not available in the US.

Compliance chart
download PDF
MRI statements

Non-clinical testing has demonstrated that the “BeGraft Aortic Stent Graft” is MR Conditional. A patient with this device can be safely scanned immediately after implantation in an MR system meeting the following conditions:

  • static magnetic field of 1.5 Tesla and 3 Tesla, with
  • maximum spatial field gradient of 3,400 G/cm (34 T/m)
  • maximum force product of 62,000,000 G²/cm (62 T²/m)
  • theoretically estimated maximum whole body averaged (WBA) specific absorption rate (SAR) of 2 W/kg (normal operating mode)

Under the scan conditions defined above, the “BeGraft Aortic Stent Graft” is expected to produce a maximum temperature rise of less than

  • 3.1°C (2 W/kg, 1.5 Tesla) RF-related temperature increase with a background temperature increase of ≈ 1.3°C (2 W/kg, 1.5 Tesla)
  • 2.9°C (2 W/kg, 3 Tesla) RF-related temperature increase with a background temperature increase of ≈ 0.8°C (2 W/kg, 3 Tesla)

after 15 minutes of continuous scanning.

The effect of heating in the MRI environment for overlapping stent grafts or stent grafts with fractured struts is not known. In non-clinical testing, the image artifact caused by the device extends approximately 18.5 mm from the “BeGraft Aortic Stent Graft” when imaged with a spin echo pulse sequence and a 3 Tesla MR system.

For further information, please see the current version of the IFUs.

Customer service:
+49 7471 984 995 10


Bentley InnoMed GmbH

Lotzen├Ącker 3
72379 Hechingen / Germany
+49 7471 984 995 10